AfterBurner Time-Lapse DVD Recorder Guía de usuario descargar pdf (Pagina 32)

Manual Issue 046 Ovation Systems Ltd. Page 32

Afterburner firmware .046 www.ovation.co.uk

Time-Lapse DVD Recorder

User Guide

8 Appendix 4: Specification

General:

Operating temperature range 0 to +40°C

Mechanical size 155 x 90 x 260 mm

Finish Painted aluminium

Weight 2.2 kg approx.

Standard accessories Mains PSU, user guide

Operating voltage range 10 to 20 V DC

Power consumption Standby: <5mA at 12 V DC

Recording: <9W (~0.7 A @ 12V)

Recording & burning: <15W (~1.3 A @ 12V)

Alarm / external interface Contact to ground, user definable change in record rate

on alarm.

RS232 interface TBA

Internal timers 4

Onscreen display Preset & user definable format of date, time, status etc.

DVD:

DVDs supported DVD +R, -R, -RW (4.7 GB)

Max burn rate x6

Typical DVD burn time 15 to 20 minutes for full disk 4.7 GB (> x4 media)

Internal hard disk 80 GB (over 16 DVDs of data). 120 GB optional.

Video:

Video standards supported PAL / NTSC (auto switching)

Video I/O connectors BNC / S-video mini DIN

Video compression MPEG-2 with time-lapse capability

Video Input / output level 1 Vpp into 75Ω

Digital sampling (PAL) PAL: 720 pixels by 576 lines. NTSC: 720 by 480

Real time record duration 1 to 4 hours per DVD.

Time-lapse record modes 4, 8, 12, 18, 36, 48 hours, 7 Days

(24hours = 1 in 12, ~2 pics / sec)

Audio (only recorded with real-time video):

Number of channels 2

Audio I/O connectors RCA Phono

Input impedence > 10 kΩ

Output impedance hardware loop to input.

Compression MPEG1 level 2

Input / output level line: 200 mV peak-to-peak nominal, 2.5 Vpp max.

Warning: Avoid touching the front panel LCD as this can cause display corruptions that may require the

unit to be power cycled, or in severe cases permanent damage.

1 2 ... 27 28 29 30 31 32

Sin comentarios

AfterBurner Time-Lapse DVD Recorder Guía de usuario Pagina 32